Facebook Archives - Page 3 of 16 - SIBOTBMX

Josh is killing it right now, and has upped his game with his new 20″ ride

he has also just been hooked up by Praze Clothing so go check out his new edit on youtube

Continue reading →

Elliot ditches his old heavy Halfords bmx and upgrades to a Fly bikes Neutron from SIBOTBMX — Elliot ditches his old heavy Halfords bmx and upgrades to a Fly bikes 2016 Neutron from SIBOTBMX

ilegal bikes now do an EXTRA SMALL shin guard for the younger rider with thinner smaller legs in stock at sibotbmxshop.com and sibotbmx store in Horley. — New to the block ilegal bikes now do an EXTRA SMALL shin guard for the younger rider with thinner smaller legs in stock at sibotbmxshop.com and sibotbmx store in Horley.

PROPER SELECT UNIVERSAL FRONT ULTRAMID NYLON HUBGUARD Our guards replace the cone nuts and (because they’re made from new the super-tough new Ultramid® nylon) there’s no need for a metal inner and they’re cheap and easy to replace. The guard is slightly wider diameter than most popular pegs (including plastic pegs) so you should protect your spokes and flanges and avoid grinding on top of the guard. This guard will fit all Proper Select hubs and V2 Microlite hubs (there’s washers supplied for your perfect spacing). It will also fit numerous other brands hubs (if they have a 15mm od axle). Our guard are based around 12mm spacing from inner bearing race to the end of the axle. If you’re hub has narrower flanges it’ll need more spacing. — PROPER SELECT UNIVERSAL FRONT ULTRAMID NYLON HUBGUARD
Our guards replace the cone nuts and (because they’re made from new the super-tough new Ultramid® nylon) there’s no need for a metal inner and they’re cheap and easy to replace. The guard is slightly wider diameter than most popular pegs (including plastic pegs) so you should protect your spokes and flanges and avoid grinding on top of the guard.
This guard will fit all Proper Select hubs and V2 Microlite hubs (there’s washers supplied for your perfect spacing). It will also fit numerous other brands hubs (if they have a 15mm od axle). Our guard are based around 12mm spacing from inner bearing race to the end of the axle. If you’re hub has narrower flanges it’ll need more spacing.

PROPER SELECT UNIVERSAL REAR ULTRAMID NYLON NONE DRIVE SIDE HUBGUARD. Hubguards protect your hub and spokes from grind damage and help to maintain a consistent grind, especially over kinks. Our rear hubguards are CNC’d from Ultramid® nylon and are re-inforced with a heat-treated 4140 chromoly inner for additional protection. Our guard replaces your non-drive side cone nut (all hardware supplied) so there is no need to spread your drop outs. This guard will fit all nearly all known hubs. It does not fit female hubs with a 17mm axle and 14mm bolts (i.e. GSport Ratchet, Odyssey Antigram, or BSD Backstreet pro). — PROPER SELECT UNIVERSAL REAR ULTRAMID NYLON NONE DRIVE SIDE HUBGUARD.
Hubguards protect your hub and spokes from grind damage and help to maintain a consistent grind, especially over kinks.
Our rear hubguards are CNC’d from Ultramid® nylon and are re-inforced with a heat-treated 4140 chromoly inner for additional protection. Our guard replaces your non-drive side cone nut (all hardware supplied) so there is no need to spread your drop outs.
This guard will fit all nearly all known hubs. It does not fit female hubs with a 17mm axle and 14mm bolts (i.e. GSport Ratchet, Odyssey Antigram, or BSD Backstreet pro).

PROPER SELECT UNIVERSAL REAR ULTRAMID NYLON DRIVE SIDE HUBGUARD. Hubguards protect your hub and spokes from grind damage and help to maintain a consistent grind, especially over kinks. Our driveside hubguards are CNC’d from Ultramid® nylon and have Heat-treated 4140 chromoly hardware. This guard will fit all known 9t hubs including 10mm axle and 14mm axle with 10mm bolts (such as the Odyssey Clutch). The guard sits between your cones and the inside of the drop out of your frame. The hub bolts the onto the guard inner which has a unique hex junction and therefore the guard cannot turn. Clamping onto a solid area also means that the wheelslip associated with inferior guards is eliminated. Our guard is also much smaller than other popular guards but covers all pegs. — PROPER SELECT UNIVERSAL REAR ULTRAMID NYLON DRIVE SIDE HUBGUARD.
Hubguards protect your hub and spokes from grind damage and help to maintain a consistent grind, especially over kinks.
Our driveside hubguards are CNC’d from Ultramid® nylon and have Heat-treated 4140 chromoly hardware. This guard will fit all known 9t hubs including 10mm axle and 14mm axle with 10mm bolts (such as the Odyssey Clutch).
The guard sits between your cones and the inside of the drop out of your frame. The hub bolts the onto the guard inner which has a unique hex junction and therefore the guard cannot turn. Clamping onto a solid area also means that the wheelslip associated with inferior guards is eliminated. Our guard is also much smaller than other popular guards but covers all pegs.

Proper bike co have done a limited run of 50 only THE SPACE INVADER CARRIER BAG.Be different and get one from sibotbmxshop.com or in store at sibotbmx horley. — Proper bike co have done a limited run of 50 only THE SPACE INVADER CARRIER BAG BACKPACK.Be different and get one from sibotbmxshop.com or in store at sibotbmx horley.

This little nutter is on it with his new United Supreme 16″ BMX.James “NO FEAR” shredded our back yard checking out the bike

Seamus came all the way from New Maldon to SIBOTBMX for his new 2016 SUNDAY BIKE.Because SIBOTBMX is the place to go for a SUNDAY BMX BIKE.You have Chosen Wisley Seamus.

New SIBOTBMX rider Archie come all the way from Wimbeldon to Sibotbmx for his new Fly Bikes Proton.A quality bike for a good price is a Fly.